# Band gap of semiconductors

**URL:** <https://forum.solidstate.quantumtinkerer.tudelft.nl/t/band-gap-of-semiconductors/927>\
**Category:** Physics Q&A\
**Created:** [April 2, 2021, 5:09pm UTC](https://forum.solidstate.quantumtinkerer.tudelft.nl/t/band-gap-of-semiconductors/927 "2021-04-02T17:09:21Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Enes](https://forum.solidstate.quantumtinkerer.tudelft.nl/letter_avatar_proxy/v4/letter/e/e36b37/32.png) [@Enes](https://forum.solidstate.quantumtinkerer.tudelft.nl/u/Enes)\
**Post date:** [April 2, 2021, 5:09pm UTC](https://forum.solidstate.quantumtinkerer.tudelft.nl/t/band-gap-of-semiconductors/927/1 "2021-04-02T17:09:21Z")

</div>

I have 2 questions regarding the band gap of semiconductors. They are both regarding the following sentence from the lecture notes:

> Firstly, we assume that the Fermi level is far from both bands E\_F−E\_v≫kT and E\_c−E\_F≫kT.

**Question 1:** How can we assume that the Fermi level is far from both bands? Isn’t the assumption of a semi conductor that the band gap is relatively small? Or else it would become an insulator right?

**Question 2:** If we assume that the Fermi level is far from both bands, how do when then know that E\_F−E\_v≫kT and E\_c−E\_F≫kT?

Thanks in advance for answering my questions!

---

<div class="post-metadata">

**Author:** ![Kostas](https://forum.solidstate.quantumtinkerer.tudelft.nl/user_avatar/forum.solidstate.quantumtinkerer.tudelft.nl/kostas/32/9_2.png) [@Kostas](https://forum.solidstate.quantumtinkerer.tudelft.nl/u/Kostas)\
**Post date:** [April 3, 2021, 10:34am UTC](https://forum.solidstate.quantumtinkerer.tudelft.nl/t/band-gap-of-semiconductors/927/2 "2021-04-03T10:34:12Z")

</div>

Thanks for the questions!

When we say things like “large” or “small”, we need to always keep in mind what we are comparing to. The assumption that we make here is that the bandgap of a semiconductor is way larger than the available thermal energy. At room temperature, the available thermal energy is around k\_B T = 25.9 meV. On the other hand, semiconductors have a bandgap E\_G of around eV. So we see that the band gap is something like 2 order of magnitude larger than thermal energy, and thus E\_G \gg k\_B T. Because the valance band of a semiconductor is full and the conduction band is empty (at T=0 that is), we _expect_ the Fermi level to be somewhere in the middle of the bandgap. Therefore, a quantity like E\_C - E\_F is gonna have a similar order of magnitude as E\_G, and we can thus use the condition that E\_c−E\_F≫kT.

Just to conclude, the semiconductors band gap is usually way larger than the thermal energy available. Of course, as you pointed out, we can say the same about insulators. The distinction between an insulator and a semiconductor is not a very solid one. Usually, we say that an insulator is something that has more than a couple of eV of the bandgap. So all the conditions we derived above also apply to insulators. However, we can distinguish the two in a more practical sense: in semiconductors, we can still measure currents, however, it is almost impossible to do so for insulators because the intrinsic density is so much smaller. For example, consider a semiconductor with band gap 1eV and an insulator with band gap 2 eV. If we take the ratio of their intrinsic carrier concentrations:

n\_{i,sem}/n\_{i, ins} \approx \exp\left(\frac{1 eV}{0.0259eV}\right) \approx 10^{16}

The semiconductor has 10^{16} times the carriers than insulator does! So a single eV makes a **huge** difference to the point that you cannot really measure the current in most insulators.

---

<div class="post-metadata">

**Author:** ![anton-akhmerov](https://forum.solidstate.quantumtinkerer.tudelft.nl/user_avatar/forum.solidstate.quantumtinkerer.tudelft.nl/anton-akhmerov/32/5_2.png) [@anton-akhmerov](https://forum.solidstate.quantumtinkerer.tudelft.nl/u/anton-akhmerov)\
**Post date:** [March 14, 2026, 3:18pm UTC](https://forum.solidstate.quantumtinkerer.tudelft.nl/t/band-gap-of-semiconductors/927/3 "2026-03-14T15:18:37Z")

</div>

Unlisted on March 14, 2026, 3:18pm UTC



---

<div class="post-metadata">

**Author:** ![anton-akhmerov](https://forum.solidstate.quantumtinkerer.tudelft.nl/user_avatar/forum.solidstate.quantumtinkerer.tudelft.nl/anton-akhmerov/32/5_2.png) [@anton-akhmerov](https://forum.solidstate.quantumtinkerer.tudelft.nl/u/anton-akhmerov)\
**Post date:** [March 14, 2026, 3:18pm UTC](https://forum.solidstate.quantumtinkerer.tudelft.nl/t/band-gap-of-semiconductors/927/4 "2026-03-14T15:18:37Z")

</div>

Archived on March 14, 2026, 3:18pm UTC



---

<div class="post-metadata">

**Author:** ![anton-akhmerov](https://forum.solidstate.quantumtinkerer.tudelft.nl/user_avatar/forum.solidstate.quantumtinkerer.tudelft.nl/anton-akhmerov/32/5_2.png) [@anton-akhmerov](https://forum.solidstate.quantumtinkerer.tudelft.nl/u/anton-akhmerov)\
**Post date:** [March 14, 2026, 3:32pm UTC](https://forum.solidstate.quantumtinkerer.tudelft.nl/t/band-gap-of-semiconductors/927/5 "2026-03-14T15:32:36Z")

</div>

Unarchived on March 14, 2026, 3:32pm UTC



---

<div class="post-metadata">

**Author:** ![anton-akhmerov](https://forum.solidstate.quantumtinkerer.tudelft.nl/user_avatar/forum.solidstate.quantumtinkerer.tudelft.nl/anton-akhmerov/32/5_2.png) [@anton-akhmerov](https://forum.solidstate.quantumtinkerer.tudelft.nl/u/anton-akhmerov)\
**Post date:** [March 14, 2026, 3:32pm UTC](https://forum.solidstate.quantumtinkerer.tudelft.nl/t/band-gap-of-semiconductors/927/6 "2026-03-14T15:32:36Z")

</div>

Listed on March 14, 2026, 3:32pm UTC


